SCADA for IoT Systems

🤖 Introduction

In this project, we’ll build a complete IoT plant monitoring system from scratch! 🌾✨

Using an ESP32, a LoRa module, and sensors for soil moisture, air temperature, and humidity, we’ll create a custom solution for real-time plant monitoring. Long-range communication is handled via LoRaWAN, making it perfect for Smart Agriculture and remote sensing applications. 📡🌦️

This repository includes:

📟 ESP32 code for reading sensor data and transmitting via LoRa 🌐 LoRaWAN Gateway setup using a Thinknode gateway 🔗 Integration with The Things Stack (TTS) for data management 📊 Real-time dashboard on TagoIO for visualizing sensor data Whether you’re into DIY electronics, IoT projects, or exploring Smart Agriculture solutions, this repo has everything you need to get started! 🌱🚀

⚙️ Tech Stack

💎 The Things Stack (TTS)

💎 ESP32 LORA

💎 TAGO.IO

🔋 Features

✅ ESP32 Integration — Code to read data from a capacitive soil moisture sensor (HW-390) and a DHT11 sensor for air temperature and humidity. 🌱🌡️

✅ LoRaWAN Communication — Long-range, low-power data transmission using an ESP32 LoRa module, connected to a Thinknode gateway. 📡🔗

✅ The Things Stack (TTS) Integration — Pre-configured device profiles and payload formatters for seamless data decoding and management. ⚙️📥

✅ TagoIO Dashboard — Real-time dashboard with custom widgets to visualize soil moisture, temperature, and humidity data. 📊💡

##🎬 Youtube tutorial

See tutorial video here

🤸 Quick Start

Get your IoT Plant Monitoring System up and running in no time! 🌱⚡

🛠 What You’ll Need:

📟 ESP32 LoRa module

🌾 HW-390 capacitive soil moisture sensor

🌡 DHT11 temperature & humidity sensor

🔋 Battery (for portable power)

📡 LoRaWAN Gateway (e.g., Thinknode)

💎 Free accounts on The Things Stack (TTS) and TagoIO

3D Models:

Main Case here

Case Cup here

Case Back here

⚡ Getting Started:

🔗 Watch the Full Tutorial Video — Follow along for the complete step-by-step guide. 🎥🚀

📥 Flash the ESP32 — Use the provided code in this repo to read sensor data and transmit it over LoRa.

🌐 Set Up TTS — Register your ESP32 device and connect it to your LoRaWAN Gateway (free tier works perfectly!).

📊 Integrate with TagoIO — Use the webhook integration to send data from TTS to TagoIO and visualize it on a real-time dashboard.

And that’s it! Your smart plant monitoring system is live and sending data! 🌾📡